Graffiti Vi01Ent Bear 37D--- DTF Iron on Heat Transfer Newg

This set includes a variety of inspirationaldesigns to help you create unique and inspiring pieces.Say goodbye to boring transfers and hello to endlesspossibilities.Experience the power of inspiration andelevate your artwork today!

**This is a DTF Transfer only**

**YOU WILL RECEIVE 1 DTF TRANSFER OF EACH DESIGN SHOWN**

Heat your press to 320-330 F depending on your presshave found the 330 F is my sweet spot.

We recommend starting with a lower temp and going tca higher temp if needed.Some presses run hot, somehave cold spots.We recommend testing your press inmultiple areas with a heat gun and practicing with extratransfers to find your "sweet spot.

Roll your garment with a fabric roller to remove as muchlint as possible.Pre-press the shirt or material for 5seconds before adding the transfer to remove moistureLay the transfer down flat with the ink facing thematerial. The image should be facing you.

Press with extremely heavy pressure for 30 seconds

Remove from heat press and after 15 seconds peel thetransfer film off of the shirt for a seamless peel.

Place substrate back onto heat press & cover the

design with a Teflon sheet or Butcher paper.

Press for 30 more seconds to ensure the transfer has

properly adhered to your substrate.

If the transfer does not stick, put the transfer paperback down, and press for a few more seconds.Transfers not sticking are usually due to uneven heating

across the press, not enough pressure, and/or notpressed long enough.

DTF transfers can be pressed onto any shirt materialincluding cotton and polvester.

Newgoo not responsible for operator ormachine error when applying screen print, DTF orsublimation transfers.We recommend purchasing extraof each transfer and practicing with your machinery,temperatures,pressure,and times before attemptingyour final product.